HP Deskjet 642c Printer - Manual (Page 48)

41
Getting Help When Things Go Wrong 4
Print quality is poor.
(continued)
You may have forgotten to
remove the vinyl tape from
the print cartridge. Make sure that you have removed the
protective piece of vinyl tape on each of the
print cartridges. See “Replacing Print
Cartridges” on page 27.
You may have the incorrect
“Image” setting in the
Color
panel of the Print dialog box.
Click the Revert to Defaults button in the
Color panel of the Print dialog box. See
“Color” on page 11.
Your print cartridges may be
out of alignment. If the color and black ink aren’t lining up on
the printed page, go to the
HP DeskJet
Utility located in the Utilities folder in your
hard drive’s main directory. Click the
Calibrate panel, then click the Align button.
See “HP DeskJet Utility Window” on page 25.
Binding margin appears in
the wrong place when
trying to do Two-Sided
Printing. You may have selected the
wrong paper orientation. • Make sure you have selected the correct
Binding option in the Layout panel of the
Print dialog box. See “Layout” on page 10.
Is there a problem with your printout? continued
What is the problem? Possible cause To solve the problem…