Check the scanner glass for dirt and smudges – HP LaserJet Pro 100 color MFP M175nw User Manual
Page 128
2.
On the control panel, press the
Copy Menu
button.
3.
Use the arrow buttons to select the Optimize
menu, and then press the
OK
button.
4.
Use the arrow buttons to select the correct
option, and then press the
OK
button.
5.
Press the Black or Color button to start
copying.
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1.
Use the power switch to turn off the product,
and then unplug the power cord from the
electrical socket.
2.
Open the scanner lid.
3.
Clean the scanner glass, the document
feeder scanning strip, and the white plastic
backing with a soft cloth or sponge that has
been moistened with nonabrasive glass
cleaner.
CAUTION:
Do not use abrasives, acetone,
benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these
can damage the product. Do not place liquids
directly on the glass or platen. They might
seep and damage the product.
114 Chapter 10 Copy
ENWW