HP ProLiant ML310 G5 Server User Manual
Page 31
Advertising
Hardware options installation 31
Hot-plug SATA and hot-plug SAS hard drives can be used interchangeably when a SAS controller is
installed. Before installing a SAS hard drive, you must install a SAS controller ("
). A SATA controller is embedded for use with SATA drives only.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
).
2.
Remove the hard drive blank.
3.
Open the release latch to prepare the drive for installation.
Advertising