HP ProLiant ML310 G5 Server - Manual (Page 40)

Hardware options installation 40
4. Remove the expansion slot cover.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all PCI slots have either an expansion slot cover or an expansion board installed.
Installing expansion boards
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the expansion boards.
1. Power down the server (on page 17 ).
2. Unlock the bezel (on page 18 ).
3. Remove the access panel (on page 19 ).
4. Remove the expansion slot cover (" Removing the expansion slot cover " on page 39 ).
5. Install the expansion board, and press firmly to seat the board in the connector.