HP ProLiant ML310 G5 Server - Manual (Page 56)

Software and configuration utilities 56
If a significant change occurs between data-gathering intervals, the survey function marks the previous
information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every SmartStart-assisted HP Insight Diagnostics installation, or it can
be installed through the HP PSP (" ProLiant Support Packs " on page 57 ).
NOTE: The current version of SmartStart provides the memory spare part numbers for the
server. To download the latest version, see the HP website ( http://www.hp.com/support ).
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each
event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:
• From within HP SIM (" HP Systems Insight Manager " on page 53 )
• From within Survey Utility
• From within operating system-specific IML viewers
o For NetWare: IML Viewer
o For Windows®: IML Viewer
o For Linux: IML Viewer Application
• From within the iLO 2 user interface
• From within HP Insight Diagnostics (on page 55 )
For more information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack.
ROMPaq disaster recovery
If the current version of the ROM is corrupt, perform ROMPaq disaster recovery procedures:
1. Create a ROMPaq diskette using the Autorun Menu on the SmartStart CD.
2. Power down the server (on page 17 ).
3. Insert the ROMPaq diskette.
4. Power up the server (on page 17 ).
a. The server generates one long beep and two short beeps to indicate that you are in disaster
recovery mode. If the diskette is not in place, the system continues to beep until a valid ROMPaq
diskette is inserted.
b. The ROMPaq diskette flashes the system ROM image. If successful, a sequence of ascending
audible beeps is generated. If unsuccessful, a sequence of descending audible beeps is
generated and you need to repeat the disaster recovery process.
5. Power down the server (on page 17 ).
6. Remove the ROMPaq diskette.
7. Power up the server (on page 17 ).