HP ProLiant BL660c Gen8 Server Blade - Manual (Page 16)

Operations 16
Remove the right DIMM baffle
To remove the component:
1. Power down the server blade (on page 12 ).
2. Remove the server blade (on page 13 ).
3. Remove the access panel (on page 14 ).
4. Disconnect any cables that may be routed across the DIMM baffle.
5. Remove the right DIMM baffle.
Remove the front panel/drive cage assembly
To remove the component:
1. Power down the server blade (on page 12 ).
2. Remove the server blade (on page 13 ).
3. Remove the access panel (on page 14 ).
4. Remove all drives (" Remove a drive " on page 14 ).
5. Remove all DIMM baffles (" Removing DIMM baffles " on page 14 ).
6. Remove all FBWC capacitor packs (" FBWC capacitor pack options " on page 39 ).
7. Disconnect the two signal cables and one power cable from each SAS backplane.