HP ProLiant BL660c Gen8 Server Blade - Manual (Page 25)

Setup 25
2. Install the server blade.
Assembling a full height blank
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade
or the enclosure unless all drive and device bays are populated with either a component or a
blank.
1. Obtain the coupler plate:
o If you are using a device bay blank that came with the enclosure, the coupler plate can be found
with the contents of the full-height device shipping box.
o If you are using a device bay blank that you purchased as an option, remove the coupler plate from
inside the blank.