HP ProLiant BL660c Gen8 Server Blade - Manual (Page 39)

Hardware options installation 39
6. Use the DIMM tool to open the DIMM slot.
7. Install the DIMM.
8. Install all DIMM baffles.
9. Install the access panel.
To configure the memory mode, use RBSU (" HP ROM-Based Setup Utility " on page 56 ).
FBWC capacitor pack options
To install the component:
1. Power down the server blade (on page 12 ).
2. Remove the server blade (on page 13 ).
3. Remove the access panel (on page 14 ).
4. Install the FBWC capacitor pack in one of the three capacitor pack carriers.