HP 6400.8400 Enterprise Virtual Array - Manual (Page 105)

Table 22 Error Messages (continued)
How to Correct Meaning Status Code Value
Resolve the condition and retry the
request. The current condition or state is preventing
the request from completing successfully. 78
Invalid object condition for this
command.
Wait for the operation to complete
and retry the request. The current condition of the snapshot,
snapclone or parent virtual disk is preventing
the request from completing successfully. 79
Snapshot (or snapclone) deletion
in progress. The requested
operation is currently not
allowed. Please try again later.
Resolve the condition by setting the
usage to a reserved state and 80 retry
the request. Invalid Volume Usage Case 1: The disk volume is already a part
of a disk group. 80
Invalid Volume Usage
Report the error to product support. Case 2: The disk volume usage cannot be
modified, as the minimum number of disks
exist in the disk group.
Resolve the condition by adding
additional disks and retry the request. The disk volume usage cannot be modified,
as the minimum number of disks exist in the
disk group. 81
Minimum Volumes In Disk Group
No action required. The controller is currently shutting down. 82
Shutdown In Progress
Retry the request at a later time. The device is not ready to process the
request. 83
Controller API Not Ready, Try
Again Later
No action required. This is a snapshot virtual disk and cannot be
a member of a Continuous Access group. 84
Is Snapshot
Modify the mirror policy and retry the
request. An incompatible mirror policy of the virtual
disk is preventing it from becoming a
member of a Continuous Access group. 85
Cannot add or remove DR group
member. Mirror cache must be
active for this Vdisk. Check
controller cache condition.
Report the error to product support. Case 1: A virtual disk is in an inoperative
state and the request cannot be processed. 86
Command View EVA has
detected this array as
Case 2: The snapclone cannot be associated
with a virtual disk that is in an inoperative
inoperative. Contact HP Service
for assistance.
state. 86 Command View EVA has detected
this array as inoperative. Contact HP Service
for assistance.
Case 3: The snapshot cannot be associated
with a virtual disk that is in an inoperative
state. Report the error to product support.
Report the error to product support. The disk group is in an inoperative state and
cannot process the request. 87
Disk group inoperative or disks
in group less than minimum.
Report the error to product support. The storage system is inoperative and cannot
process the request. 88
Storage system inoperative
Resolve the condition and retry the
request. The request cannot be performed because
the Continuous Access group is in a failsafe
locked state. 89
Failsafe Locked
Retry the request later. The disk cache data need to be flushed
before the condition can be resolved. 90
Data Flush Incomplete
105