Specifications, Environmental specifications, Storage array specifications – HP D6000 Disk Enclosure User Manual

Page 41

Advertising
background image

Specifications 41

Specifications

Environmental specifications

Specification

Value

Temperature range*

Operating

10°C to 35°C (50°F to 95°F)

Maximum rate of change is 10º C/hr (50º F/hr)

Storage

-30°C to 60°C (-22°F to 140°F)
Maximum rate of change is 20º C/hr (68º F/hr)

Relative humidity**

Operating

10% to 90% relative humidity (Rh), 28º C (82.4º F) maximum

wet bulb temperature, non-condensing

Storage

5% to 95% relative humidity (Rh), 38.7º C (101.66º F)

maximum wet bulb temperature, non-condensing

Altitude ‡

Operating

3048 m (10,000 ft)

This value may be limited by the type and number of options
installed.

Non-operating

9144 m (30, 000 ft)

* Temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m

(10,000 ft) is applicable. No direct sunlight allowed. The upper limit may be limited by the type and number of options

installed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for

storage corresponds to a pressure minimum of 70 KPa.

‡ Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Storage array specifications

Specification

Value

Height

22.10 cm (8.70 in)

Depth

89.12 cm (35.08 in)

Width

44.70 cm (17.60 in)

Weight (maximum)

145.15 kg (320.00 lb)

Weight (no drives installed)

72.58 kg (160.00 lb)

Advertising