Steps – HP Deskjet 5850 Color Inkjet Printer User Manual
Page 38
Advertising
If one of these network settings in the printer is incorrect, you will not be able to
communicate with the printer:
●
●
●
Channel (Ad hoc networks only)
●
●
●
Follow these steps to correct the printer's network settings:
1. Connect the printer to your network or computer with an Ethernet cable.
2. Open the printer's
.
3. Click the
Networking
tab, then click
Network Settings
under the Configuration
heading.
4. Change the printer's settings to match the settings of the network, then click
Finish
.
Click the
Advanced Configuration
button to access advanced
authentication and WPA (TKIP) settings.
5. Close the printer's EWS, then disconnect the Ethernet cable from the printer.
Advertising