HP Deskjet 5850 Color Inkjet Printer - Manual (Page 67)

connecting the printer to an ethernet network
Follow these steps to connect the printer to an Ethernet network:
1. If necessary, set up the printer hardware.
For printer hardware setup instructions, see the setup poster that came with
the printer.
2. Verify that the printer is powered on.
3. Connect the Ethernet cable to an available port on the network hub or router .
Do not plug the Ethernet cable into a port labeled WAN or
Uplink.
4. Connect the Ethernet cable to the Ethernet port on the back of the printer.
The printer's wireless radio is disabled when a Ethernet cable
is connected to the printer.
5. Do one of the following:
if the link light is... then...