HP Officejet 7110 Wide Format ePrinter - H812a - Manual (Page 110)

Light description/Light pattern Explanation and recommended action
The HP ePrint light is off. HP ePrint has not been set up.
● To set up HP ePrint, press the
(HP ePrint) button, and then follow
the instructions on the information
page that prints.
HP ePrint has been set up but has been
turned off.
● To turn on HP ePrint, press the
(HP ePrint) button.
HP ePrint is turned on but is unable to
connect.
● HP ePrint is unable to connect,
possibly because the server is
unavailable or the network is not
functioning properly.
If your network uses proxy settings
when connecting to the Internet,
make sure the proxy settings you
are entering are valid. For more
information, see the getting started
guide provided with the printer or
check with the IT administrator or
person who set up your network.
Press the (HP ePrint) button to
try connecting again.
◦ If the printer can connect, the
HP ePrint light turns on, and
the printer prints an information
page.
◦ If the printer still cannot
connect, the HP ePrint light
blinks and then turns off, and
the printer prints an information
page.
HP ePrint has been set up but has been
turned off because the printer has not
been updated.
● If a mandatory update for the printer
is available but has not been
installed, HP ePrint is turned off.
After the update has been installed,
HP ePrint turns on automatically.
For more information about
installing the printer update, press
the (HP ePrint) button.
ENWW Control panel lights reference 97