HP StorageWorks XP Remote Web Console Software - Manual (Page 53)

Performing XP Remote Web Console Operations 53
• The percentage of On Demand volumes compared to the total open-system capacity is displayed in
parentheses and in the white area of the pie chart.
If you select External Device Only in the Device Type drop-down list, the On Demand Capacity field is
not displayed.
Mainframe Systems:
Figure 3-7 Capacity Box (Mainframe Systems)
• The Device Type drop-down list allows you to select the type of volumes to be displayed, as follows:
• Total Device displays information on all volume types.
• Internal Device Only displays information on internal volumes only.
• External Device Only displays information on external volumes only.
• The Mainframe Volume button displays the volume capacity information for all available mainframe
(zSeries ® and S/390®) and multiplatform volumes in the subsystem. The displayed information does not
include the capacity of V-VOL. If there are no mainframe or multiplatform volumes, No Volume is displayed.
• The Allocated LDEV Capacity field displays the following information about the available mainframe
(zSeries ® and S/390®) and multiplatform volumes:
• The capacity of the assigned LDEVs
• The percentage of assigned mainframe (zSeries ® and S/390®) and multiplatform LDEVs compared to
the total mainframe and multiplatform capacity is displayed in parentheses and in the blue area of the
pie chart.
• The Reserved Capacity field displays information about the available mainframe (zSeries ® and S/390®)
and multiplatform volumes that are reserved for Volume Migration. The following information is displayed:
• The capacity of the reserved volumes
• The percentage of reserved volumes compared to the total mainframe and multiplatform capacity is
displayed in parentheses and in the pink area of the pie chart.
3-1-1-6 Number of LDEVs Box
The Number of LDEVs box is on the lower right of the XP Remote Web Console Main pane.
Each LDEV included in a LUSE is counted in the Number of LDEVs box. For example, if a LUSE includes
four LDEVs, all four LDEVs are counted.