HP StorageWorks XP Remote Web Console Software User Manual
Page 73
Performing XP Remote Web Console Operations 73
Table 3-5
Operation and Terms Displayed in Audit Log File
Delete-Lu (Force) (
Note 1
)
Alternate Path
(ADD / Delete / Priority UP /
Priority Down)
Alternate-Path (
Note 1
)
Check Paths & Restore Vol.
ChkPath-RestoreVol (
Note 1
)
Disconnect Subsystem / Disconnect
Volume
Disconnect-Volume (
Note 1
)
Disconnect Paths
Disconnect-Paths (
Note 1
)
Check Paths
Check-Paths (
Note 1
)
Change Parameter
Wwn Timer (
Note 1
)
Restore / LDEV Restore
LDEV
Volume-Restore(F) (
Note 1
)
Port Operation
Change to Target / Change to
External
PORT Change
Port
Create Pair
Paircreate (
Note 1
)
Flex Copy
Delete Pair
CSC
Pairsplit-S (
Note 1
)
CFL Configuration
File
Loader
Upload CFL
LUNM
Operation
Note: The log information is not
output for the format violation and
inconsistency of configuration.
License Key
Install
PP Install (
Note 1
) (
Note 2
)
SNMP
Uninstall
PP Uninstall (
Note 1
) (
Note 2
)
File
PP Install from File
License Key
Apply
PP Key
PP Apply
SNMP
Set SNMP Agent
SNMP
Set SNMP Agent
Release
Release LUN (
Note 1
)
Extend Release
Cache
(
Note 1
)
On Demand
Extend
JIT
Release Cache / CLPR (
Note 1
)
Partition Definition Apply
(Create SLPR / Delete SLPR / Create
CLPR / Delete CLPR / Paste CLPR,
Port / Paste PG / SLPR Parameter /
CLPR Parameter)
VPM Set
On Demand
License Key
Partition Definition
Apply
PP Key
SLPR PP Charge
Note 1:
When two or more settings of the same type are applied to the subsystem at one time, the log
information is output as one entry.
Note 2:
When one or more settings that are applied at one time end abnormally, the output log information will
be Error, not Warning.
Note 3:
When two or more LUN Manager operations are performed, the following parameters apply:
•
When two or more operations are performed on one target and then the Apply button is clicked, the log
information is output as one entry.
•
When two or more settings are applied at one time, the log information is output according to the priority
shown in