Cleaning the glass cooktop (cont.) probe – GE PS920SFSS User Manual

Page 26

Advertising
background image

26

49-80694-1

Metal Marks and Scratches

 %HFDUHIXOQRWWRVOLGHSRWVDQGSDQVDFURVV\RXU

cooktop. It will leave metal markings on the cooktop
surface.
These marks are removable using the CERAMA
%5<7(

®

Ceramic Cooktop Cleaner with the CERAMA

%5<7(

®

Cleaning Pad for Ceramic Cooktops.

2.

If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop.

This should be removed immediately before heating
again or the discoloration may be permanent.

NOTE: Carefully check the bottom of pans for roughness
that would scratch the cooktop.

Damage from Sugary Spills and Melted Plastic

Special care should be taken when removing hot substances to avoid permanent damage of the glass surface.
Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your
cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when
removing hot substances.
%HVXUHWRXVHDQHZVKDUSUD]RUVFUDSHU
Do not use a dull or nicked blade.

1.

Turn off all surface units. Remove hot pans.

2.

Wearing an oven mitt:



 D8VHDVLQJOHHGJHUD]RUEODGHVFUDSHU &(5$0$

%5<7(

®

Ceramic Cooktop Scraper) to move the

spill to a cool area on the cooktop.

b.

Remove the spill with paper towels.

3.

Any remaining spillover should be left until the surface
of the cooktop has cooled.

4.

Don’t use the surface units again until all of the
residue has been completely removed.

NOTE: If pitting or indentation in the glass surface has
already occurred, the cooktop glass will have to be
replaced. In this case, service will be necessary.

The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the temperature
probe before cleaning. Scour stubborn spots with a soap-
filled scouring pad, rinse and dry.
To order additional temperature probes read the
Assistance and Accessories sections at the beginning of
this manual.
Ŷ Do not immerse the temperature probe in water.
Ŷ Do not store the temperature probe in the oven.
Ŷ Do not leave the temperature probe inside the oven

during a self or steam clean cycle.

Cooktop Seal

To clean the cooktop seal around the edges of the glass,
lay a wet cloth on it for a few minutes, then wipe clean
with nonabrasive cleaners.

CARE AND CLE

ANING:

Cleaning the Glass Cooktop / Probe

Cleaning the Glass Cooktop (Cont.)

Probe

Advertising
This manual is related to the following products: