GE JB870DFBB User Manual
Acceptable electrical outlet area, Imagination at work
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
JB870DF/TF
GE® 30” Free-Standing Electric Double Oven Range with Convection
Dimensions and Installation Information (in inches)
Receptacle Locations
Locally approved flexible service cord or conduit must be used
because terminals are not accessible after range installation.
See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly
against wall.
Note: This appliance has been approved for 0” spacing to
adjacent surfaces above the cooktop. However, a 6” minimum
spacing to surfaces less than 15” above the cooktop and
adjacent cabinet is recommended to reduce exposure to
steam, grease splatter and heat.
Installation Information: Before installing, consult installation
instructions for current dimensional data and additional
requirements.
Acceptable electrical
outlet area:
Use a flush mount
outlet receptacle.
Orient the receptacle
so the length is
parallel to the floor.
KW Rating
240V
15.2
208V
11.4
Breaker Size
240V
40 Ampst
208V
40 Ampst
^Note: Check local codes for required breaker size.
i ^
'
Í
11
'
i
47
35-3/4
to
36-1/2
'
r ’r
7
-
1/2
imagination at work
For answers to your Monogram® or GE®
appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
All GE ranges are equipped with
an Anti-Tip device The installation
of this device is an important,
required step in the installation
of the range.
Specification Created 6/13
Listed by
Underwriters
Laboratories
321564