GE JP256BMBB - Manual (Page 10)

10
Cleaning the glass cooktop.
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45° angle
against the glass surface and scrape
the soil. It will be necessary to apply
pressure to the razor scraper in order
to remove the residue.
After scraping with the razor scraper,
spread a few drops of CERAMA
BRYTE ® Ceramic Cooktop Cleaner on
the entire burned residue area. Use
the CERAMA BRYTE ® Cleaning Pad to
remove any remaining residue.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE ®
Ceramic Cooktop Cleaner and a
paper towel.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than
the pad included with your cooktop.
Allow the cooktop to cool.
Spread a few drops of
CERAMA BRYTE ® Ceramic Cooktop
Cleaner on the entire burned residue
area.
Using the included CERAMA BRYTE ®
Cleaning Pad for Ceramic Cooktops,
rub the residue area, applying
pressure as needed.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
The CERAMA BRYTE ® Ceramic
Cooktop Scraper and all
recommended supplies are available
through our Parts Center. See
instructions under “To Order Parts”
section on next page.
NOTE: Do not use a dull or nicked
blade.
Heavy, Burned-On Residue
Use a CERAMA BRYTE ® Cleaning Pad
for Ceramic Cooktops or a Scotch-
Brite ® Multi-Purpose No Scratch blue
scrub pad.
Normal Daily Use Cleaning
Use CERAMA BRYTE ® Ceramic Cooktop
Cleaner on the glass cooktop.
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the first
time, clean it with CERAMA BRYTE ®
Ceramic Cooktop Cleaner. This helps
protect the top and makes cleanup
easier.
Daily use of CERAMA BRYTE ® Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
Shake the cleaning cream well. Apply
a few drops of CERAMA BRYTE ®
Ceramic Cooktop Cleaner directly to
the cooktop.
Use a paper towel or CERAMA BRYTE ®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel to
remove all cleaning residue. No need
to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
Clean your cooktop after
each spill. Use CERAMA
BRYTE ® Ceramic Cooktop
Cleaner.