GE ZV48SSFSS - Manual (Page 5)

49-80151-8
5
Advance Planning
INSTALLATION CLEARANCES
These vent hoods are designed to be installed onto a wall
RUEHQHDWKDVRI¿WRUFDELQHW
• Install these hoods* 30" Min. to 36" Max. above the
cooking surface.
*These hoods may be installed 24" min. above a gas or
electric drop-in style cooktop. Always observe the 30" to
36" clearance when installed over any professional style
cooktop or range.
In this installation the ductwork running from the top
RIWKHKRRGZLOOEHFRQFHDOHGLQWKHVRI¿WRUXSSHU
cabinetry.
For this installation, a decorative duct cover is
available to conceal the ductwork running from
the top of the hood. Use of the duct cover requires
special consideration to the installation height above
the countertop.
Note: Clearances may vary due to type of cooking product
and local codes. Check with local inspectors to be sure stan-
dard is applicable.
SOFFIT
Soffit Installation
30" MIN.
36" MAX.
Wall Mount Installation
30" MIN.
36" MAX.
OPTIONAL DUCT COVER
ACCESSORIES
Standard decorative duct covers are available in 6" and
12" heights. Duct covers may be stacked, in various
combinations, to conceal the ductwork running from the
top of the hood to the ceiling.
• Before you begin, you should determine the
installation height of the hood and order the correct
size duct cover. The duct covers should be ordered at
the same time as the vent hood and be on site before
installation. Order the duct cover corresponding to your
model.
6" Duct Cover
12" Duct Cover
Standard Duct Covers
6" Duct Covers
Hood Model
6” Duct Cover Dimensions
ZV48T, ZV48S ZX48DC6 6"H x 19-11/16"W x 11-7/8"D
ZV36T, ZV36S ZX36DC6 6"H x 15-3/4"W x 11-7/8"D
ZV30T, ZV30S ZX36DC6 6"H x 15-3/4"W x 11-7/8"D
'XFW&RYHUV
+RRG0RGHO
µ'XFW&RYHU 'LPHQVLRQV
ZV48T, ZV48S ZX48DC12 12"H x 19-11/16"W x 11-7/8"D
ZV36T, ZV36S ZX36DC12 12"H x 15-3/4"W x 11-7/8"D
ZV30T, ZV30S ZX36DC12 12"H x 15-3/4"W x 11-7/8"D