GE ZFGP21HZSS - Manual (Page 4)

Installation Instructions
4
TOOLS REQUIRED
• Adjustable wrench
• 3/8" and 5/15" socket ratchet/driver
• Phillips head screwdriver
• 3/32", 1/8", 1/4" Allen wrenches
• 1/8" Drill bit and electric or hand drill
• Tape measure
• Pencil
• Wire cutters
• 1/4" Nut driver
• Level
MATERIALS REQUIRED
• 1/4" O.D. compression nut and 2 ferrules (sleeves)
OR GE SmartConnect ™ Refrigerator Tubing Kits
FLOORING
For proper installation, this refrigerator must be placed on
a level surface of hard material that is at the same height
as the rest of the flooring. This surface should be strong
enough to support a fully loaded refrigerator.
IMPORTANT NOTE: Protect the finish of the flooring.
Cut a large section of the cardboard carton and place
under the refrigerator where you are working.
GROUNDING THE REFRIGERATOR
IMPORTANT – (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) wall receptacle to
minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by a
qualified elec tri cian to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is en coun tered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT
THE REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.