GE 24988 GE Infrared Signal Remote Extender - Manual (Page 3)

Features
1. Blue IR confirmation LED.
2. Wide band IR receives IR from many type of remotes.
3. Self-adhesive tape for quick and easy fixing on any flat surface.
4. 3 meter cable with 3.5mm stereo mini-plug.
Instructions
1. Power
Connect the 12 VDC (500mA) power supply to the power jack of the IR HUB.
The red LED will be illuminated when powered. This will power all of the
IR components connected to the system.
2. IR Receiver
This is a three terminal 1/8” plug that is common to many of the free standing
IR receivers.
3. Emitter Outputs
Connect IR emitters to the emitter jacks. Place the emitters on the
source equipment.