GE 24988 GE Infrared Signal Remote Extender - Manual (Page 6)

b. It may also be due to a peculiar RCU / sensor combination. Placing the
emitter 2” - 4” away from the IR sensor can achieve significantly better
activation in such cases. Please experiment to achieve optimal activation
before securing with the self-adhesive pads.
c. Some flat panel TVs emits interference for the IR receiver to receive
signals. Placing the receiver up to 6” away from the front of the TV
may allow the receiver to better receive IR signals.
d. The signal received may not be sufficient. Try reducing the distance
between the IR Receiver and the remote control to obtain a
stronger signal.
CAUTION: Use only the power adaptor supplied to power the IR Repeater.
Do not use any other power adaptor with this product.
Specifications
Receive Frequency Range…………………………..… 34 kHz to 60 kHz
Transmit Frequencies……………………………..……... 38 KHz & 56 KHz
Range………………………………………………....……............ 40ft. @ 38 KHz
.................................................................................. 25ft. @ 56 KHz
Power Requirement…………………………………........ 12VDC, 500mA max.
Dimensions…………………………..………………………...... 45L x 14W x 13H mm
Cord Length……………………………..……………………..... 10ft (3m)
Connector Type…………………………..…..…………….... 1/8” (3.5mm) TRS mini plug
Weight………………………………….....………………………… 28 g