GE 51207 GE Wireless Motion Sensor Alarm with Keychain Remote - Manual (Page 3)


INSTALLING BATTERIES
The Remote Controlled Motion Sensing
Alarm requires 3 AA Alkaline batteries (not
included).
Installing Batteries in the Alarm
The battery compartment is located on
the back of the unit.
Remove the battery compartment
screw and slide off cover in the
direction of the open arrow.
Insert (3) AA batteries (not included) .
Take care to note the polarity diagram
inside the battery compartment.
Replace the cover and secure screw.
Installing batteries in the remote control
The Remote Control requires a CR2032
battery (included). Average battery life for
typical usage is one year.
Slide off battery compartment cover
1.
2.
3.
1.