GE 45145 GE Choice Alert Wireless Panic Button - Manual (Page 8)

8 9
Mounting the Panic Button onto a Wall
(using screws/wall anchors)
– you will need drill, 3/16” or 1/8” drill bit and a flat
blade-type screwdriver.
1. Remove the top cover from the mounting plate. (See
Removing the Top Cover from the Mounting Plate.)
Set the top cover aside.
2. Select a suitable location that provides protected,
easy access. Be sure to test the device before
mounting. Use the bottom mounting plate as a
template. Mark the two holes on the wall for the
anchors and/or screws as shown. Please be sure to
mark the center of the holes.
3(a). If mounting into drywall, use the plastic anchors.
Using a 3/16” drill bit, drill holes and insert anchors for
a snug fit. Align mounting plate holes to anchor holes,
insert screws and screw in until plate has secure fit.
Do not over-tighten screws.