GE 45144 GE Choice Alert Key-chain Remote - Manual (Page 8)

8 9
2. Replace the old battery with a new “12V” battery,
noting polarity.
3. Replace Battery cover.
To replace a Keychain Remote
If the Keychain Remote is lost or broken, you can either
replace it with another Keychain Remote or remove
it completely from the Control Center. To replace a
Keychain Remote (with another Keychain Remote or
any of the remote transmitters) simply assign the new
Keychain Remote to the specific device number. The
new remote will automatically replace the previous
remote.
To remove a Keychain Remote
CAUTION: Removing a Keychain Remote from the
Control Center will also erase any sensors in the
associated zone. Sensors will have to be added back
to the zone (Refer to sensor manual or Control Center
manual for specific instructions).
To remove a Keychain Remote (or any remote
transmitters) from device number location in the
Control Center, press and hold the ‘Learn’ button and
the device number together on the Control Center until
the Control Center sounds two beeps. Release buttons.
Description Battery Type Battery Life*
Control Center (4) “AAA” 24 months
Keychain (1) “23AE(12V)” 24 months
Remote
*maximum potential life based upon usage and location