GE 45613 GE Z-Wave 3-Way Dimmer Kit with flying leads - Manual (Page 20)

- Valid Values:
Parameter 7 (default = 1) Valid Values: 1-99
Parameter 8 (default = 3) Valid Values: 1-255
2. Manual Control Dimming (pressing the Dimmer’s rocker)
- Parameter 9 (number of steps or levels)
- Parameter 10 (timing of the steps)
- Length: 1 Byte
- Valid Values:
Parameter 9 (default = 1) Valid Values: 1-99
Parameter 10 (default = 3) Valid Values: 1-255
3. When Receiving an All-On or All-Off Command
- Parameter 11 (number of steps or levels)
- Parameter 12 (timing of the steps)
- Length: 1 Byte
- Valid Values:
Parameter 11 (default = 1) Valid Values: 1-99
Parameter 12 (default = 3) Valid Values: 1-255
Ignore Start Level When Receiving Dim Commands
Please note: Every “Dim” command includes a start level
embedded in it.
The 45607 can be set to ignore the start level that is part of the
dim command. Setting parameter 5 to a value of 0 will cause
the 45607 to dim or brighten from the start level embedded in
the command.
- Parameter No: 5
- Length: 1 Byte
- Valid Values = 0 or 1 (default 1)