GE 45260 GE Home Monitoring Wireless Color Camera System with Receiver - Manual (Page 10)

10
Desktop Mount:
1. Place camera in desired location on a flat surface.
2. Set Channel switch on camera to 1 or 2.
3. Power ON the TV/monitor; reconnect AC adapter
to the camera.
4. Select the channel (1 or 2) on the receiver that
corresponds to the camera channel setting. (See
Channel Selection)
5. Adjust antenna and camera angle as needed for
the clearest picture. Positioning
the antenna upwards to
improve sensitivity, and
downwards to reduce
sensitivity. Take care not
to force the antennas
past their lock positions.
Wall Mount:
1. To simplify the wall mount
process, you will find a custom
wall mounting plate included with
the mounting hardware.
2. Select the ideal location. Using
the supplied mount as a template, drill two 3/16”
holes in the desired mounting location, and install
the two wall anchors (included) into the holes, or
screw directly into a wall stud. Secure the mounting
MIN
SE
NS
ITI
VIT
y MAX
Antenna pivots to
increase/decrease
signal strength