GE 45260 GE Home Monitoring Wireless Color Camera System with Receiver - Manual (Page 8)

8
Auto Mode (2 Camera Operation)
To have the receiver automatically switch between
two active channels, first check the receiver is set to
1/2 position. Next, press the AUTO button on the top
panel of the receiver. The green LED will light and
the receiver will automatically select between the
two active cameras. The monitor will display images
from both cameras alternately.
Cycle Time Setting (Time interval between
camera selections)
The default cycle time for the receiver is preset to
4 seconds. To change the cycle time, press both of
the buttons (Auto and Manual) on top of the receiver
simultaneously. The LED will flash; each flash adds
one extra second of cycle time. The cycle time can
be verified by the number of flashes the LED makes
when you release the buttons—one flash equals
one second. Cycle time can be set between 2-30
seconds.
NIGHT VISION
The Wireless Color Camera features Night Vision
technology. Objects and images can be seen in little
or no light up to 10 ft. The camera uses a special
image sensor that automatically detects available
light levels. It turns on/off the Infra-Red (IR) LEDS on
the front of the camera. These LEDs provide artificial
light that allows the camera to ‘see’ in the dark.