GE 45604 GE Z-Wave Outdoor Module - Manual (Page 8)

Remote Control
GE Z-Wave remotes provide control of an Individual device,
Groups of devices and Scenes. Other brands of Z-Wave
Certified remotes may not offer as much flexibility in how
you can set up your lighting control network. Please refer
to your remote control’s instructions for details on its
capabilities and instructions for adding and controlling
devices.
Manual Control
The Pushbutton on the 45604 Appliance Module
allows the user to:
Manually turn the connected equipment ON or OFF by
pressing the button.
- This is a toggle switch; if the device is OFF, pressing the button
turns the device ON and vice versa.
2. Include or exclude the module from the Z-Wave home control
network with your primary controller.
- Refer to the instructions for your primary controller to access the
network setup function and include or exclude devices.
- When prompted by your primary controller, tap the button.
- The primary controller should indicate that the action
was successful. If the controller indicates the action was
unsuccessful, please repeat the procedure.
- Once the module is part of the network, the same basic
procedure is used to add the module to groups or scenes. Refer
to the primary controller’s instructions for details.
1.