Aiphone JK-1MED - Manual (Page 7)

- 7 -
English
Fr
ançais
Neder
lands
6
OPERATING METHOD
To operate this unit, check the symbol and then press the appropriate operation button
This is not a touch-panel operation.
Do not press on the LCD or subject it to high
impact.
The LCD glass could break which could
result in an injury.
Symbol
The symbols differ according to the symbol
screen.
Operation buttons:
Press to select the symbol that is displayed
on the screen.
* The name of the operation button may
differ from the name of the symbol.
To operate a symbol, press the operation
button that is below the symbol.
Example: To activate manual recording, press
RECORD button below the symbol
* In the manual, an explanation is given using
the REC button ( ).
7
SETTING UP
Upon initial installation, set the time first. If the unit is used without setting the time, the menu LED (red) will light up as notification.
When power has not been supplied for at least 3 hours, the time setting will return to the initial setting and the menu LED may flash. Reset the
time again.
If there are no operations for approximately 1 minute during the setup mode, the setting will end automatically. If the settings are incomplete, start
again from the beginning.
Symbol Function description
To manually record.
To return to the screen of the previous
operation.
To display the previous (more recent
date) picture.
To play the recorded pictures.
To display the next (older date) picture.
To save or erase an image.
To erase a recorded image.
To fast forward the play screen.
To pause the play screen.
To advance the play screen frame by
frame.
To reverse the play screen frame by
frame.
To erase the display.
To save recorded pictures.
Setting can also be done by pressing
ZOOM/WIDE button.
Main symbols and function descriptions
1
In the standby mode, press MENU button until the setting screen
is displayed (approximately 1 second).
> 1Sec.
2
Press  button or  button to select "INITIAL SETTING", and
press MENU button ( ).
3
Press  button or  button to select the item you want to set or
check, and set with the MENU button ( ).
SET THE DATE/TIME
To set the year, date, and time.
SET EXTERNAL INPUT
SETTING
To set the external input.
SELECT THE LANGUAGE
To select the language used.
RESTORE DEFAULT
SETTING
To initialize the settings.
4
When completing the time setting, press OFF button to return to
the standby mode. In other cases, set by pressing MENU button
(
). Press REC button ( ) to cancel the setting and return
to the previous screen.
7-1 Setting screens and display methods