Boonton 9240 RF Voltmeter - Manual (Page 86)

Boonton 9240 Series RF Voltmeter
Table 5-1. SCPI COMMAND SUMMARY (continued)
CALCulate:MATH:ARGB
Set or return the second argument to be used for channel math
operations.
CALCulate:MATH:DATA?
Returns the channel math result.
CALCulate:MATH:OPERator
Set or return the channel math operator.
CALCulate:MODE Set/return
remote measurement mode
<character data> = NORMal, FAST, FILTered
CALCulate[1|2]:REFerence:COLLect Set the current reading to be the ratiometric measurement reference
level.
CALCulate[1|2]:REFerence:DATA
Set or return the ratiometric measurement reference level in dBm.
<numeric value> = -99.99 to +99.99 dBm
CALCulate[1|2]:REFerence:STATe
Set or return the ratiometric measurement mode state.
<Boolean> = 0, 1, OFF, ON
CALCulate[1|2]:STATe Enable
currently selected channel allowing measurements to be
made. <Boolean> = 0, 1, OFF, ON
CALCulate[1|2]:UNITs
Change channel units. <character value> = DBM, Watts, Volts,
DBV, DBMV, DBUV
CALibration[1|2]:ZERO Start
zero process.
DISPlay:ACTive
Set/return the active channel for talk commands.
DISPlay:CLEar
Clear measurement data and display.
DISPlay:LIN:RESolution
Set number of significant digits for linear displays and remote
return values. <numeric value> = 3 to 5
DISPlay:LOG:RESolution Set
number of decimal places for log displays and remote return
values. <numeric value> = 1 to 3
DISPlay:LABel:MODE
Enables/disables the user message display.
<Boolean> = 0, 1, OFF, ON
DISPlay:Label:TEXTA
Displays a text message in the first label field.
<alphanumeric value> = A to Z, a to z, 0 to 9 ! @ # $ % ^ & *
( ) _ - + = { } [ ] ? / < > : .
DISPlay:Label:TEXTB
Displays a text message in the second label field.
<alphanumeric value> = A to Z, a to z, 0 to 9 ! @ # $ % ^ & *
( ) _ - + = { } [ ] ? / < > : .
DISPlay:Label:TEXTC
Displays a text message in the third label field.
<alphanumeric value> = A to Z, a to z, 0 to 9 ! @ # $ % ^ & *
( ) _ - + = { } [ ] ? / < > : .
Remote Operation
5-36