Advanced configuration – Hootoo HT-WR01 Repeater User Manual
Page 12
Advertising
11
Advanced Configuration
Advanced configuration options for the Repeater can be accessed via the web
interface.
Step 1. Connect an RJ45 Ethernet cable from the Repeater to your computer.
Step 2. The default IP address on the Repeater is 192.168.10.1; configure your
computer to a matching network address (192.168.10.x, where ‘x’ is between 2~255)
with subnet set to 255.255.255.0 and default gateway to 192.168.10.1.
(Refer to page
X)
Step 3. Open a web browser window and enter 192.168.10.1 into the address bar. This
will bring up the login prompt for the Repeater. The default user name and password
are ‘admin’ (without quotes).
Advertising