Hootoo HT-WR01 Repeater - Manual (Page 3)

2
Introduction
The HT-WR01 300Mbps Wireless-N WiFi Access Point and Repeater has two selectable
modes for extending the range of existing wireless networks or adding wireless
capabilities to a non-wireless network. Using a wall plug design, this allows for
convenient or hidden placement anywhere there is an available AC outlet. As a
wireless repeater, the effective range of any 802.11n WiFi network can be increased,
while still providing up to 300Mbps of data bandwidth. This WiFi signal booster can help
eliminate dead spots and provide a stronger signal in areas with obstructions that can
reduce the range of a wireless signal. The WiFi range extender is also backward
compatible with 802.11b/802.11g networks. As a wireless access point (AP), any
non-wireless router can be given wireless-N capabilities. Built in wireless security
(WEP/WPA/WPA2) will help to keep the network private. Backed by a HooToo.com
1-year warranty and free lifetime technical support.
Packaging Contents
• 1x Wireless-N Repeater
• 1x RJ45 Ethernet Cable
• 1x Instruction Manual
System Requirements
• Available AC electrical outlet
Repeater Mode:
• IEEE 802.11B or G or N compliant wireless access point (AP)
Access Point Mode:
• IEEE 802.3i/802.3u (10/100 Mbps) compliant network router
• RJ45 terminated UTP Ethernet cable