Jesel INS-06048 Brodix SB Chevy Canted Valve - Manual

Instruction Sheet
Brodix SB Chevrolet
Canted Valve
INS-06048
TORQUE SPECS:
5/16-18 x 1.250” Shaft Bolt 26-28 FT / LBS
5/16 Stud / Nut 28-30 FT / LBS
7/16-14 x 1.000” Stand Bolt 60-65 FT / LBS
Adjuster Nut 26-28 FT / LBS
Note:
Torque specs shown were calculated using
30wt engine oil on threads. You must adjust the
torque spec if using a lubricant other than engine
oil.
THESE INSTRUCTION SHEETS ARE INTENDED AS REPRESENTATIONS ONLY. JESEL IS IN NO EVENT LIABLE FOR CONSEQUENTIAL DAMAGE,
INSTALLATION COST OR OTHER COST OF ANY NATURE. NO REPRESENTATIVE IS AUTHORIZED TO ASSUME FOR JESEL ANY OTHER LIABILITY
IN CONNECTION WITH ANY JESEL PRODUCT. NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
www.jesel.com
ROCKER STANDS:
Quan Part Number Description
4 STN-20060 Intake Stand, All Cylinders
2 STN-20059 Exhaust Stand, Cyl 3,5,4 & 6
4 STN-20061 Exhaust Stand, Cyl 1,7,2 & 8
HARDWARE KIT COMPONENTS:
Quan Part Number Description
16 BLT-21892 7/16-14 x 1.000” T-50 Stand Bolt
21 BLT-21750 5/16-18 x 1.250” T-45 Shaft Bolt
6 STD-29240 5/16-18 x 5/16-24 x 1.650 Stud
6 NUT-24545 5/16 12pt ARP Nut
1 TOL-19210 T-45 Torx Socket
1 TOL-19221 T-50 Torx Socket
1 TOL-29400 5pc Checker Pushrod
ROCKER SERVICE PARTS:
Part Number Description
ADJ-20230 Valve Lash Adjuster
WSH-29800 Valve Lash Adjuster Washer
NUT-24500 Valve Lash Adjuster Nut
BRG-20610 Shaft Bearing, 9/16 ID x 3/4 Long
BRG-20620 Shaft Bearing, 9/16 ID x 1/2 Long
SFT-28060 Intake Rocker Shaft, All Intakes
SFT-28050 Exhaust Rocker Shaft, Center Cylinders
SFT-28000 Exhaust Rocker Shaft, End Cylinders
SPC-28360 .067 Rocker Spacer
RNG-26210 Retaining Ring
Jesel, Inc
1985 Cedar Bridge Ave
Lakewood, NJ 08701
Phone: (732) 901-1800
Fax: (732) 901-6777
ERR-06048#1
IRL-06048 IRR-06048 IRR-06048 IRL-06048
ERL-06048#3 ERR-06048#5 ERL-06048#7