Rocky Mountain Radar Phantom-T - Manual (Page 3)

Installation:
1) Complete, sign, and mail the Ticket Rebate
Registration Card within 30 days from the date of
purchase.
2) Attaching the windshield bracket to the
Phantom-T detector. Align the edge on the bracket
with the slot opening on the front of the case.
Gently slide the bracket into the case until it locks
into place.
3) Place the windshield bracket in the upper center
portion of the windshield. The ideal position will be
right below the rear view mirror. Make sure the unit
has an unobstructed view of the road. Then press
firmly to seat suction cups. Note: Tinted glass will
degrade the laser performance.
4) Bend the windshield bracket mount to a level
position.
5) The Phantom-T will hang from the bottom of the
bracket and must have an unobstructed view of the
road ahead.
6) Insert the small end of the power cord gently into
the power jack on the right side of the unit and the
large end into the cigarette lighter receptacle.
Remote mounting is not recommended.
Hard wire: Remove cigarette lighter plug. Connect
the black with white stripe wire to +12 Volts, and
then connect the solid black wire to ground.
2