Rocky Mountain Radar Phantom-T - Manual (Page 7)

Scrambler Activation:
All scramblers are factory set to the off position:
Scrambler: Phantom-T to turn the scrambler
on/off, power off the unit, press and hold the city
button down while turning power back on the unit.
If the scrambler is on, the "T" LED light will be
included in the startup sequence. The "T" LED light
is the test diagnostics for the scrambler.
Scrambler Operation:
Drive normally. When the detector sounds an alert,
take your foot off the gas, check your speed, adjust
if necessary, and resume driving. Do not apply
brakes unless you are grossly exceeding the speed
limit. The scrambler will disable the radar long
enough for you to adjust speed safely, if necessary.
Important information:
When driving in states that ban scramblers -
turn off the scrambler function. Detectors are
legal in all states except Virginia and
Washington D.C. With the scrambler off, this
unit is only a detector.
6