Rocky Mountain Radar Phantom-T - Manual (Page 4)

CONTROLS: There are 4 buttons on top of the
PHANTOM-T, Test, Dim, Mute and City.
Dim: Press the Dim button for one second to dim
the alarm lights. There are 3 levels of brightness.
To brighten the alarm lights press the dim button
again. The unit will beep two times for Dim, One
beep for dimmer; two beeps for dark, one beep for
bright.
NOTE: MUTE function will not operate on
DARK mode.
Mute: Press the Mute button for one second to
disable the alarm speaker for quiet operation. To re-
activate the alarm speaker press the Mute button
again for one second. The unit will beep one time
for “mute on” and three beeps for “mute off.”
Auto-Mute: Press the Mute button for a split
second (momentary contact) to disable the alarm
speaker for quiet operation. In Auto-Mute operation
the unit will give 4 beep alerts then keep mute. The
unit will beep three times for “Auto-Mute.”
City: Press the City button for one second to
reduce false alarms in high RF noise areas. The
yellow City light will illuminate to show activation. The unit will beep one time for Highway and two
beeps for City.
Test:
Press the “Test” button to get into the test
mode. It automatically changes the settings to
“MUTE OFF, BRIGHT, and SCRAMBLER ON”.
It will give test alert in the order of SCRAMBLER
-> K -> Ka -> Laser. After Test Alert is done, it
will automatically go back to stand by status.
3