Schumacher SI-1275A - Manual (Page 36)

• 36 •
17. SPECIFICATIONS
Data Plate 230V, 50/60Hz
Model SI-82-6MA SI-70MA SI-1275A
Single Phase Power Supply (Vac) 230 230 230
Frequency (Hz) 50/60 50/60 50/60
Charging Voltage(s) (V) 12 12/24 4 12
Starting Voltage(s) (V) -- -- 12
Effective Charging Current, Continuous (A) 2/6¹ 10 2/12¹
Starting Current at 1.0 Volt (minimum) /
Cell (A) 5
-- -- 75 5
Max. Power Absorbed Charge/Start (KW) 0.115 .23/.42 .28/1.6
Dimensions (mm)
220 x 170 x
105
270 x 210 x
130
270 x 210 x
130
Weight (Kg) 3.8 6.5 7.5
Circuit Breaker Protected Output Yes² Yes² Yes³
Circuit Breaker Rating (A) 12 20 35
1. Switched Output Current
2. Push To Reset Output Breaker
3. Automatic Reset Output Breaker
4. Switchable Output Voltage
5. Duty Cycle Limited To 5 Seconds On, 240 Seconds Off
Hereby declares that the equipment Models SI-82-6 – SI-70MA – SI-1275A is compliant
to the DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 (RoHS) on the restriction of the use of certain hazardous
substances in electrical and electronic equipment while:
The parts do not exceed the maximum concentrations of 0.1% by weight in homogenous
materials for lead, mercury, hexavalent chromium, polybrominated biphenyls (PBB)
and polybrominated diphenyl ethers (PBDE), and 0.01% for cadmium, as required in
Commission Decision 2005/618/EC of 18 August 2005.
19 May 2010
President, Schumacher Electric Corporation – U.S.A.