SIGMA RC 14.11 - Manual (Page 24)

72 www.sigmasport.com
5 SETTING MODE
5.5.18 LOG INTERVAL
To evaluate the training in the DATA CENTER 2 software, the RC 14.11
saves the speed and heart rate at specific time intervals, known as log
intervals. You can change the log interval in line with your needs. To
record multiple and long training units, select a long log interval. If the
recording should be as detailed as possible, select a short log interval.
The following log intervals can be set:
5 sec., 10 sec., 20 sec. and 30 sec.
Depending on the memory/log interval, the maximum memory times
are as follows:
k 5 seconds, approx. 15 hours
k 10 seconds, approx. 30 hours
k 20 seconds, approx. 60 hours
k 30 seconds, approx. 90 hours (Factory setting)
The maximum duration of a training unit is 99:59:59 hours.
Tip: The function “Remaining log” can be found in the RC 14.11’s
training menu. This indicates the current log capacity in hours.
The memory interval can be set by following the steps described
in section 5.4 “Brief guide to device settings”.
A description of how to download your logbook can be found in section 9
“Data transfer”.