SIGMA RC 14.11 - Manual (Page 27)

75
US/GB
6 CALIBRATION AND CORRECTION FACTOR
Prerequisite: The device must be in training mode.
You are wearing the R3 transmitter and the running computer.
6.3 ACTIVATING CALIBRATION
Hold down the SET button until the setting mode is
activated.
Press the SPEED (+) button repeatedly until the
“Calibration” function appears.
Press the SET button. The RC 14.11 determines the
position of the R3 sensor (chest or hip) and starts
the calibration function. The RC 14.11 guides you
through the calibration.