Sper Scientific 840088 pH Kit - Basic - Manual (Page 12)

- 12 -
Operating Conditions 0 to 50°C, Less than 80% RH.
Display Sampling Time Approximately 1 second.
Power Drain
Approximately DC 21.5 mA for the meter. DC
27.5mA for the meter and anemometer probe.
Dimensions
Meter 7 ¾" x 3" x 1½" (200 x 76 x 37 mm)
Sensor head diameter: 2 ¾" (70 mm)
Cable length (max. stretched): 60" (1524 mm)
Probe length: 5 1/2" (140 mm)
Weight: 31 oz (515 g)
Misc.
Rev. 4/28/06
Thermocouple Range Res. Accuracy
Type K
-58~2372ºF
-50~1300ºC
0.1º
±(0.2% + 1ºF)
±(0.2% + 0.5ºC)
Type J
-58~2012ºF
-100~1100ºC ±(0.2% + 1.8ºF)
±(0.2% + 1ºC )
Type K/J specification tests under the environment RF Field Strength less
than 3 V/M and frequency less than 30 MHz.
Temp. Compensation
Automatic for K/J thermometers.
WARRANTY
Sper Scientific warrants this product against defects in materials and
workmanship for a period of five (5) years from the date of purchase, and
agrees to repair or replace any defective unit without charge. If your model
has since been discontinued, an equivalent Sper Scientific product will be
substituted if available. This warranty does not cover probes, batteries, or
damage resulting from accident, misuse, or abuse of the product. In order
to obtain warranty service, simply ship the unit postage prepaid to:
SPER SCIENTIFIC LTD.
7720 East Redfield, Suite 7, Scottsdale, Arizona 85260
(480) 948-4448, www.sperscientific.com, [email protected]
Please Note: The defective unit must be accompanied by a description of
the problem and your return address.