Measurement procedures – Sper Scientific 840034 Psychrometer - Anemometer User Manual
Page 10
Advertising
- 10 -
After 60 seconds the LCD displays the average vol-
ume.
To measure additional outlets, press
Enter and you
will be returned to the air volume dimensions setup
screen (see below).
MEASUREMENT PROCEDURES
Capacity Size Set Up
Hold the
Mode button while in normal mode to enter air vol-
ume, then press again for approximately one second to en-
ter capacity mode.
If measuring more than one outlet, press
Enter again
to repeat the procedure from outlet size input.
After measuring multiple outlet volume, press Mx/Mn
key to review the sum of all outlets. Press
Hold key
to review the last outlet volume.
Advertising