Sper Scientific 800036 WBGT Heat Stress Meter - Manual (Page 11)

- 18 - - 11 -
MEASUREMENT PROCEDURES
Display Mode Selection
1. Turn on the meter by pressing the SET button.
The LCD display turns on and the meter enters
measuring mode.
2. Press the MODE button to cycle through the RH
percent, WBGT, TA, and TG modes,
respectively.
The software interface protocol is 9600 bps, 8 data
bits, with no parity. The communication format
transmits ASCII code every second while the
WBGT Heat Stress Meter is turned on.
Format:
Wxxx.xC(F):Txxx.xC(F):Txxx.xC(F):Hxx.x%LRCCRLF
The first value represents the WBGT; the second value represents
TA; the third value represents TG; and the fourth represents the RH.
For convenient long-term monitoring, you can
mount the WBGT Stress Meter on an optional
Bench-Top Tripod (840092) or Field Tripod
(840093) using the built-in tripod mount at the back
of the unit.
MEASUREMENT PROCEDURES