Sper Scientific 800036 WBGT Heat Stress Meter - Manual (Page 12)

- 17 - - 12 -
MEASUREMENT PROCEDURES
3. Press and hold the MODE button to select the
environment mode. Each time you press and
hold the MODE button, the LCD display
switches between IN (for indoor measurements)
and OUT (for outdoor measurements).
4. When reading temperature, press the MODE
and NEXT buttons simultaneously to select
between a Celsius (C°) and Fahrenheit (F°)
temperature reading.
MEASUREMENT PROCEDURES
- 17 -
Note…
If you have selected a setting that is out of range
(lower than the current temperature), the LCD will
display OUT under the temperature setting.
Data Analysis
WBGT Heat Stress Meter includes a USB port to
connect your meter to a PC to store, analyze, and
print data.
USB Cable (840054) and the Data Acquisition
Software (840052) are available as optional
accessories.