Sper Scientific 850010 Ultraviolet Light Meter UVC - Manual (Page 9)

- 16 - - 9 -
BASIC FUNCTIONS
Meter Function Flow Chart
1. Press MODE to choose the main function
(MAX/MIN/AVG, Zero, Unit, Type or Time).
MAX/MIN/AVG Mode is Normal Mode for
this meter and has several sub-functions as
indicated in the diagram below.
MEMORY
were automatically recorded, “AUTO”
appears next to “MEM” during the recall.
4. As you scroll through data points 0 to 20, the
saved minimum, maximum, or average value
appears on the secondary display.
5. The “MAX”, “MIN” or “AVG” icon will appear
on the bottom of the LCD next to the data
point number to indicate whether the
secondary display represents a maximum,
minimum, or average value for that data
point. If none of these icons appear, the val-
ue represents a stored value at that data
point that is not a minimum, maximum or
average value.
Clear Data
1. Press MODE to select Zero Mode.
2. Press M to clear all 20 stored data points.