Setup mode – Sper Scientific 850055 pH Meter - Advanced User Manual
Page 11
Advertising
11
SETUP MODE
4. Press MN/MX/AV to enter P2.1. The default “NO” icon
flashes on the middle display and P2.1 appears in the
lower display.
5. Press ▲ to change the status from “NO” on
The display to “YES” and then press MN/MX/AV
again to confirm clearing of all memory. The LCD
display will return to P2.0 when memories are deleted.
CAUTION:
THE MEMORY CLEAR PROGRAM IS DESIGNED TO
CLEAR 99 MEMORIES AT ONE TIME. PLEASE
CONSIDER CAREFULLY IF YOU DECIDE TO CLEAR
THE MEMORY AS THIS OPERATION CANNOT BE
REVERSED.
Advertising