Sper Scientific 840046 RF Microwave Meter - Manual (Page 12)

- 12 -
2. Press POWER to turn the meter off.
Press and hold MAX/MIN while
simultaneously pressing POWER to
turn the meter on. Auto-power-off is
now disabled.
3. To restore auto-power-off: Press
POWER
to turn the meter off and
then press POWER again to turn the
meter back on. will appear on the
LCD to indicate that auto-power-off
is enabled.
Alarm
The meter features a built-in alarm that
will sound when the measurement
exceeds 1 mW/cm
2 . The alarm will stop
sounding when the measurement falls
under 1 mW/cm
2 . This threshold value
cannot be changed.
MEASUREMENT PROCEDURES