Sper Scientific 840046 RF Microwave Meter - Manual (Page 8)

- 8 -
MEASUREMENT PROCEDURES
1. Press POWER to turn the meter on.
2. Press FREQ. RANGE to select
microwave (2.45 GHZ) or RF (50
MHZ~3.5 GHZ). When 2.45 GHZ
is selected, “2450 MHZ” will appear
on the lower right corner of the LCD.
When normal range is selected,
“2450 MHZ” will disappear from
the lower right corner of the display.
3. For general information on
microwave oven leakage and
instructions on preparing for
microwave measurement,
see page 14.
4. Position the top of the meter to
measure the electromagnetic waves.
Adjust the measurement angle or
position until the highest reading
is obtained.