Yetter 1300 Seed Jet II - Manual (Page 7)

7
ASSEMBLY INSTRUCTIONS
HOPPER UNIT SET UP
With the assistance of another person and/or lifting equipment, position the hopper assembly next to
the discharge slide door of your gravity wagon. The hopper should be level once attached.
The brackets supplied are of a universal type and it may be necessary to drill extra holes in the
frame of your wagon to attach these parts. The long pins and spacers provided should
accommodate most sizes of wagons. Install the 3/16” x 1 ¼” roll pin onto the hopper pins before
attaching the hopper to the brackets.
*CAUTION: Ground clearance of wagon is reduced when hopper unit is attached,
before transporting, rotate the hopper assembly upward and secure with
3/16 chain. Negotiate obstacles and uneven terrain carefully.