Yetter 1300 Seed Jet II - Manual (Page 8)

8
ASSEMBLY INSTRUCTIONS
35’ SEED HOSE ASSEMBLY
STEP 1. Attach the 1300-124 seed hose assembly to the 2 1/4” airlock fitting and secure with the 2570-
716 muffler style clamp. DO NOT OVER TIGHTEN THE CLAMP.
STEP 2. Attach the 1300-166 cyclone exhaust kit to the seed cyclone. Left hand thread the 2515-712 hose
cuff onto the 1300-553 3 1/8” OD vinyl hose. Then insert the hose and cuff assembly into the top of the
cyclone. Using plastic tie straps, tie the vinyl hose to the stainless steel seed hose using the (3) 2515-405
black cable ties.